TCP / IP网络培训

TCP / IP网络培训

TCP / IP网络培训,TCP/IP培训

客户评论

SIP protocol in VoIP

Handson and setup were nicely done and practical knowledge thoroughly imparted. Trainer was really helpful throughout.

B Kishore - Bharat Electronics Limited (BEL)

其他课程类别

TCP / IP网络大纲

代码 名字 期限 概览
wpeapawscw One Day Workshop for PEAP Authentication of Windows 7 Supplicant using a Cisco Switch as Authenticator and Windows 2008 R2 Server 7小时 This one day workshop covers the configuration and operation of the IEEE802.1x protocol in the authentication and authorisation of a wired Windows 7 supplicant. The authenticator is a Cisco Switch and the server is Windows NPS running on Windows 2008 R2 server, operating as a Certification Authority (CA). The EAP protocol is Protected EAP (PEAP) and a successful request will be allocated a VLAN on the switch via RADIUS attributes received from the server following successful authentication. The procedure for a wired supplicant is almost identical to that of a wireless supplicant. Audience: Suitable for network planners, engineers or anyone interested in operation of PEAP with Cisco IOS Devices and NPS. Objectives Review the operation of IEEE802.1x process. Configure Cisco Switch to use IEEE802.1x and RADIUS. Configure Cisco Switch to authorise VLAN assignment via RADIUS attributes from server. Configure Windows 7 supplicant for dot1x authentication and install certificate from CA as a trusted computer certificate. Configure connection request and network policies on NPS to authenticate and to pass VLAN assignment to switch. Configure Windows users/groups on Windows 2008 R2 server to enable NPS authentication. Configure Windows 2008 R2 server as a DHCP server. Configure ip helper addresses and inter-VLAN routing on Cisco L3 switch. Test successful PEAP authentication and PING PCs in different VLANs. Equipment used in Practical Sessions: Cisco L2 and L3 switches running v12 of IOS. Windows 2008 R2 server running Network Policy Server (NPS).
plcladder PLC Ladder Programming 14小时 Automation Engineers, Passionates who would like to create their own intelligent home etc.PLC Basics and overview of applications with PLC Overview of PLC programming languages (Ladder, SFC, C) Simple Ladder programming Coils, Inputs, Outputs Working with memory Logical functions Advanced functionality Sample programming - exercises PLC and Networking
sipvoip SIP protocol in VoIP 21小时 The course consists of two complementary parts – a theoretical and a practical one. The first is a one day introduction covering motivation, philosophy, fundamentals and rules of operation of the SIP protocol and ways it is used to implement telecom services with focus on IP telephony and VoIP. The second two-day part enables participants to learn practical aspects of service operation within a framework of hand-on laboratory exercises giving detailed insight into configuration of components of SIP telephony architecture, SIP signalling at both message sequence chart and internal message structure levels, and assists in understanding of typical problems and troubleshooting including security and telecom fraud aspects. The trainers will share their experience in launching, operation and management of SIP telephony covering also virtualization and cloud based solutions. Practical part is presented using both SIP hardphones and softphones and IP telephony servers (Asterisk and Freeswitch). Participants can take advantage of the fact trainers have got rich technical and business experience in IP telephony and submit their own problems and questions. They will be included in the agenda at wrap-up as a supplement to the training to meet current urgent needs of clients. Training is addressed to participants with basic knowledge and experience in telecom services – specifically in VoIP and IP networking.  Part I: Introduction Introduction History and motivation Types of VoIP and its evolution SIP – main concepts SIP standardization (RFC 3261 and other relevant standards) Architecture UA – User Agent Predefined servers: Registrar, Location, Proxy and Redirect Application servers Identification and addressing SIP trapezoid Servers and their operation Registration  SIP server in Proxy and Redirect modes Stateless and stateful Proxy servers Location server SRV records and DNS uri/url/urn, ENUM and NAPTR records SIP signalling messages (including Instant Messaging & Presence – IMP extensions) Message structure Requests Responses Example of a call Headers and parameters IMP models SDP (Session Description Protocol) Description of media Standard list of codecs Session negotiation rules Call flows – SIP signalling SIP session – main  RFC 3261 example Sample call scenarios Conferencing and IP PBX Changing media during a session Using IMP Routing of SIP requests and responses VIA header ROUTE and RECORD-ROUTE headers SIP-PSTN interworking SIP-T and SIP-I SIP early media and SIP trunking SIP-PSTN signalling SIP – security problems Secure SIP, Secure RTP and Secure RTCP Typical implementations of Secure SIP Practical problems and perspectives NAT and firewall traversal QoS SIP and SDP in 3GPP IMS architecture Wrap-up and discussion Part II: Hands on SIP in LAN environment: XLite SIP UA + Asterisk Creating Asterisk accounts with a simple dial plan Configuration of XLite SIP UA (dtmf, codecs, nat, rtp, timer, register) and SIP phones (Polycom, Gigaset, Yealink, Linphone) Registration, initiating and receiving calls P2P calls with Linphone Analyzing of SIP signalling using Wireshark Configuration of a server Registration of SIP signalling and RTP media streams SIP packet analysis. Retrieval of a specific call Voice quality problems. Jitter buffer. Retrieval of DTMF signalling (RFC 2833, INFO). Codec and DTMF troubleshooting (transcoding, GSM codec failure, DTMF tone duplication) VoIP monitor SDP, Instant Messaging and Presence (IM&P) SDP parameters and attributes SUBSCRIBE, PUBLISH and MESSAGE SIP methods Practising IM&P with XLite and Linphone SIP call flows SIP Registration with DNS SIP SRV record SIP phone registration using DNS-SRV Call Flows with DNS Analysing SIP call signalling using Wireshark Troubleshooting – DNS timeout, latency SIP trunks Establishing a test SIP trunk Troubleshooting (DOS, DDOS, fraud, cps) SIP security issues SIP security with IPSec Security with Secure SIP IP telephony – risk of frauds Preventing DDOS and other types of attacks Launching SIP based VoIP services Configuration of a switch SIP client configuration and registration Software Asterisk PBX / Freeswitch softswitch / Cisco Call Manager Linux CentOS TDM2IP drivers Softphones (XLite, Linphone) Hardware Server TDM2IP card/gateway Hardphone (Polycom, Gigaset, Yealink) Softphone/Hardphone Configuration Codecs User/Password/SIP Server/Proxy/Ports Operation and signalling for: 3-Way Calling Call Forwarding Attendant Call Transfer MWI, BLF Yealink autoprovisioning Vendor dependent constraints SIP & Network Adress Translation (NAT) problems Type and structure of NATs STUN (Simple Traversal of UDP Through NATs) Quality of VoIP calls – troubleshooting Call connected – missing media Key QoS factors Delay, jitter, play buffer size VoIP quality metrics RTCP – delay and jitter MOS according to ITU-T G.107 E-model VoIP quality monitoring tools (Voipmonitor) Cloud based IP telephony Wrap up and addressing SIP and VoIP related issues submitted by participants
Munin Monitoring your resources with Munin 7小时 Munin is an open-source monitoring tool that helps system administrators monitor resources such as servers, workstations, networks, SANs, applications, network devices, etc. It shows resource trends and provides insights to into questions such as "what just happened to kill our performance?" It includes visualization tools and is available on various flavors of Linux and FreeBSD. Audience System administrators Network administrators Network engineers IT managers IT administrators Format of the course Heavy emphasis on hands-on practice. Most of the concepts are learned through samples, exercises and hands-on development. Introduction Master-node architecture Installation Requirements Master and node setup Monitoring with Munin Visualizing resources and trends Graphing system Data logging Integration with Nagios Monitoring Windows nodes Working with Plugins Working with the API Troubleshooting Munin Closing remarks  
dnsandbind DNS and BIND: Setting up, managing, and securing your DNS server 14小时 DNS (domain name system) is the "phone book" of the internet, providing a directory of computer names and their IP addresses. BIND is the most common Linux implementation of DNS. When you open a website or send and receive an email, a DNS server somewhere is quietly addressing your message to its intended recipient. In this training, participants will learn the critical features of DNS while carrying out exercises in the setup and configuration of a BIND DNS server on Linux. The course starts with a refresher on key networking principles, then digs into hands-on practice with setup and configuration. Steadily, the discussion and exercises move towards more complex topics such as security, availability, debugging and troubleshooting. Audience     Network technicians     Network designers     System administrators Format of the course     Part lecture, part discussion, heavy hands-on practice and implementation, occasional quizing to measure progress Introduction How DNS works Different types of name servers Installing BIND Configuring BIND Creating Zones DNS server and email Configuring your hosts Maintaining BIND Adding name servers Parents and sub-domains Securing your name server Stealth configurations Load balancing and failover Deploying IPv6 Supporting international domain names DNS and DHCP Dynamic DNS Interoperability and upgrading Debugging your name server Troubleshooting tools and techniques Closing remarks
varnish Varnish: Speeding up your website with HTTP reverse proxy caching 7小时 Varnish is a reverse proxy for content-heavy dynamic web sites. Unlike Squid, which was originally a client-side cache, or Apache and nginx, which are web servers, Varnish was designed as an HTTP accelerator. Varnish is focused exclusively on HTTP, unlike other proxy servers that support FTP, SMTP and other network protocols. Varnish is used by Wikipedia, The New York Times, Facebook and Twitter, among other high-profile websites. In this course, participants will learn about Varnish's features and caching approach while practicing in the setup and configuration of a Varnish proxy on Linux. The course starts with a refresher on key networking principles, then digs into setup and configuration topics and moves steadily towards complex implementations. By the end of the training participants will understand when and where it makes sense to deploy Varnish and will have the necessary practice to deploy their own Varnish proxy solutions. Audience     Network technicians     Network designers     System administrators Format of the course     Part lecture, part discussion, heavy hands-on practice and implementation, occasional quizing to measure progress Introduction     Varnish vs Nginx vs other solutions Overview of caching and proxy servers Installing and configuring Varnish Using the Varnish Administration Console (VAC) Handling HTTP connections with Varnish Working with the Varnish Configuration Language (VCL) Invalidating the Varnish cache Understanding the lifetime of cached objects Dealing with Backends Optimizing connections Logging, measuring and debugging Varnish Integrating Varnish with other infrastructure and services Closing remarks
tcpipprac Practical TCP/IP 28小时 This 4 day course involves a mixture of expository based (utilising protocol analyser traces where appropriate) and practical experiments to test and verify the operation of TCP/IP networks. The major aspects of the TCP/IP protocol stack are covered, including subnetting, supernetting and running dynamic routing protocols. TCP and UDP will be compared and contrasted, covering the end-to-end reliability and congestion avoidance capabilities of the TCP/IP stack. Some application layer protocols (HTTP, TLS, DNS, DHCP etc) will be investigated during the course. Network security in the form of TLS will be covered both from a theoretical and practical standpoint. The practical exercises are designed to augment the theory and enhance both the understanding of the underlying protocols and also the problem solving abilities of the delegates. Audience: Suitable for anyone looking for an understanding of TCP/IP. Course is approximately 50% practical. Objectives: Describe encapsulation, de-encapsulation and modularity within the TCP/IP protocol stack. Describe, identify and explain the fields and flags within the IP header. Describe, identify and explain IP address classes A, B and C. Use subnet mask to identify network portion of IP address. Describe differences between classful and classless IP addressing. Describe the operation of an IP router and the use of static and dynamic routing. Describe and compare distance vector (RIP) and link-state (OSPF) routing protocols. Describe and explain IP subnetworking. Describe and explain supernetting, VLSM and CIDR. Describe ICMP and use ping and traceroute as a network connectivity tool. Describe use of DHCP in dynamic IP addressing. Describe and use ARP to relate IP address to MAC address. Describe and explain the use of DNS in TCP/IP networks. Describe, identify and explain the fields and flags in the TCP and UDP headers. Describe and explain how TCP gives end to end reliability in an unreliable IP network. Describe and explain the operation of congestion avoidance in TCP/IP networks. Describe and explain Transport Layer Security (TLS). Practical Exercises: Lab Exercise 1: Connectivity and Testing. Lab Exercise 2: DHCP and DNS. Lab Exercise 3: Checking ARP cache. Lab Exercise 4: Fragmentation. Lab Exercise 5: Traceroute. Lab Exercise 6: Routing. Lab Exercise 7: Subnetting. Lab Exercise 8: TCP Options. Lab Exercise 9: TLS.
ipv6und Understanding IPv6 14小时 A 2 day theoretical course (with some practical demonstrations) covering the fundamentals of Internet Protocol v6 – including addressing, protocol formats, ICMP v6, discovery processes and IP v6 routing. Audience: Network Planners, Designers, and Engineers requiring an understanding of IP v6. Those requiring a comprehensive overview of IP v6 and the migration process from an IP v4 environment. Objectives: Explain the benefits of migrating from IP v4 to IP v6 Describe and explain the IP v6 fixed header format Describe and explain the IP v6 optional header formats Describe and explain global IP v6 unicast addresses and aggregation Describe and explain link-local IP v6 unicast addresses Describe and explain multicast IP v6 addresses Describe and explain anycast IP v6 addresses Describe and explain IP v6 special addresses Describe IP v4 to IP v6 compatibility and mapped addresses Describe and explain ICMP v6 messages Describe and explain path MTU discovery Describe and explain neighbour discovery process Describe and explain router discovery process Describe and explain multicast listener discovery process Describe and explain stateful and stateless auto-configuration Describe and explain IP v6 and DNS Describe IP v6 routing protocols – RIP, OSPF, ISIS and BGP v4 Describe IP v4 to IP v6 migration strategies. Practical Demonstrations: Demonstrate IP v6 addressing and local link communication. Demonstrate IP v6 routing processes.
vvoip Practical Voice and Video over IP 21小时 A 3 day practical course covering the fundamentals of the various voice protocols used to carry voice (and video) over a packet switched network. This course is a mixture of theory and practice (utilising Wireshark where appropriate for explanation and troubleshooting) with practical VoIP configured using IP telephones, softphones and voice capable Cisco routers. This is primarily a ‘generic’ VoIP course – but uses Cisco equipment to provide an IP backbone and voice gateways. We can also provide Cisco specific voice training courses. The course also covers call setup between circuit switched and packet switched networks. The course is approximately 40% practical. Objectives: Explain the operation of circuit switched networks. Contrast the differences between circuit switched and packet switched networks. Explain the fields and flags within the IP header – including the new DSCP field. Explain and quantify the need for voice compression and delay in an IP network. Identify the CODEC’s used in voice and video compression – e.g. G711, G729 and H261/3/4. Identify and explain the fields of the Real Time Transport Protocol and Real Time Control Protocol – including carrying DTMF tones. Calculate bandwidth requirements for various voice compression algorithms. Explain and demonstrate the need for security and encryption within VoIP. Describe and explain the H.323 protocol stack. Describe and explain call setup and signalling (H.225). Describe and explain H.245, fast start and tunnelling of H245. Describe and explain SIP call setup. Describe and explain SIP Servers. Describe and explain SDP. Describe and explain Soft Switching – including MGCP and H248. Describe and explain the use of SCTP in backhauling signalling messages. Describe and explain the importance of network delay and the need for QoS in the network. Describe and explain the differences between reservation and prioritisation QoS in an IP Network. Describe the use of IntServ and RSVP in QoS. Describe the use of TOS and DiffServ in QoS. Describe and explain the need for multiple queues and intelligent scheduling of packets at router/switch interfaces. Describe the use of MPLS to deliver QoS in the WAN environment. Describe the use of VLAN’s to deliver QoS in the LAN environment. Practical Exercises: Lab Exercise 1: Practical VoIP in the LAN. Lab Exercise 2: Build IP network, make calls and examine RTP packets using Wireshark. Lab Exercise 3: Make calls and examine SIP Packets using Wireshark. Lab Exercise 4: Make calls and examine H323 Packets using Wireshark. Lab Exercise 5: Calls between PSTN and IP Networks. Lab Exercise 6: Configure QoS and make calls to examine effects. Lab Exercise 7: Security and VoIP. Equipment used in Practical Sessions: Cisco 2600 series and 2800 series voice capable routers and Cisco ASA 5505 Firewalls. IP Telephones, softphones and analogue telephones as required. SIP client and server software as required.
siptel Practical SIP Telephony 21小时 A 3 day practical course covering the messages and call flows of the Session Initiation Protocol (SIP) and its use in voice networks. This course is a mixture of theory and practice (utilising protocol analyser traces where appropriate for explanation and troubleshooting) with practical VoIP configured using IP telephones, softphones, voice capable Cisco routers and SIP IP PBX,s (e.g. Trixbox). Audience: Network Planners, Designers, and Engineers requiring an understanding of SIP. The course is around 40% practical. Objectives: Describe call signalling and setup in the voice network Describe carrying of voice media and bandwidth requirements for VoIP calls Describe SIP standards, services, messages and return codes Describe basic call setup using SIP Describe SIP flows and SDP Describe registration process and making calls with a SIP Server Describe IP PBX and Call Conferences Describe SRV records and DNS Describe uri/url/urn, ENUM and NAPTR Records Describe mapping of services to an address Describe SIP-T and SIP-I Describe SIP early media and SIP trunks Describe call flows between PSTN and IP using SIP Describe Secure SIP, Secure RTP and Secure RTCP Describe typical Secure SIP implementations Practical Exercises: Lab Exercise 1: Practical SIP in the LAN with Xlite Lab Exercise 2: Examine SIP Packets using Wireshark Lab Exercise 3: SDP, Presence and IM Lab Exercise 4: Call Flows with SIP Server Lab Exercise 5a: SIP Registration with DNS Lab Exercise 5b: Call Flows with DNS Lab Exercise 6: SIP Trunks Lab Exercise 7: Security with IPSec Lab Exercise 8: Security with Secure SIP
pradtacacs Practical RADIUS and TACACS+ 14小时 A 2 day practical course that covers the theory of RADIUS and TACACS+ protocols. Network Policy Server (NPS) on Windows 2008 Server will be used to implement Connection Request and Network Policies to allow users access to network resources. A windows based TACACS+ server will be used to investigate the operation of this protocol to provide authentication, authorisation and accounting for users accessing network resources. There is an option for an additional one day workshop to configure and test IEEE802.1x authentication using Windows 7 client as the supplicant, a Cisco switch as the authenticator and an NPS server to provide the authentication. Delegates will configure the Cisco switch and NPS server to use the Extensible Authentication Protocol (EAP). Audience: Network Planners, Designers, and Engineers requiring an understanding of RADIUS and TACACS+ operation Course is approximately 40% practical. Objectives: Describe and explain RADIUS protocol. Describe and explain RADIUS messages and attributes. Describe and explain the differences between clients and users. Describe and explain the TACACS+ protocol. Compare the operation of RADIUS and TACACS+ protocols. Describe and explain operation of Network Policy Server (NPS) in Windows Server 2008. Describe and explain Connectiion Request and Network Policies. Use Windows Server 2008 logs to troubleshoot RADIUS operation. Use NTRADping test utility to test RADIUS operation. Describe and explain TACACS+ message format and operation. Configure Cisco switch/router as a RADIUS client and test operation. Explain and configure standard and vendor specific attributes on NPS Server. Configure Cisco switch/router as a TACACS+ client and test operation. Describe configure and test RADIUS and TACACS+ accounting. Describe and explain RADIUS Proxy operation. Configure and test RADIUS proxy and load balancing using NPS. Practical Exercises: Lab Exercise 1: Configure and test RADIUS. Lab Exercise 2: RADIUS Authentication/Authorisation. Lab Exercise 3: TACACS+ Authentication/Authorisation. Lab Exercise 4: RADIUS Accounting. Lab Exercise 5: TACACS+ Accounting. Lab Exercise 6: Proxy RADIUS Lab Exercise 7:Load Sharing RADIUS Requests
ipsecvpn Understanding IPSec VPNs 14小时 This 2 day course investigates the theory and technology associated with IPSec VPN’s.VPN’s are setup using Cisco IOS Routers and ASA Firewalls using the web interface. The workings of the protocols are examined using debug commands and protocol analyser traces of relevant negotiations. Audience: Suitable for network planners, engineers or anyone interested in IPSec VPNs Course is approximately 40% practical Objectives Review TCP/IP and the fields in the IP Header. Describe the fields and headers in the ISAKMP Protocol. Describe Main Mode negotiation to set up Phase 1 of a VPN Describe Aggressive Mode negotiation to set up Phase 1 of a VPN. Describe Quick Mode negotiation to set up Phase 2 of a VPN. Compare IKEv1 and IKEv2 protocols. Describe Symmetric and Public/Private Key encryption. Describe ISAKMP Security Associations. Describe IPSec Security Associations. Describe IPSec AH Protocol. Describe IPSec ESP Protocol. Describe and Explain Diffie-Hellman Key Exchange. Describe prime and primitive root of a prime number. Describe, explain and configure site to site VPN’s using Cisco Routers and/or ASA Firewalls. Describe Remote Access VPN’s using ADSL and Dial-up. Use debug commands in Cisco CLI and wireshark to demonstrate and troubleshoot VPN negotiation. Practical Exercises: Lab Exercise 1: IPSec using manual, symmetric encryption keys. Lab Exercise 2: IPSec using IKE and shared secret Lab Exercise 3: IPSec using IKE and certificate authentication.
casapixo Cisco ASA/Pix Operation 28小时 A 4 day instructor-led practical course designed to familiarise delegates with the Cisco ASA Firewall CLI and ASDM. The course details the key commands used to configure and secure networks using the ASA Firewall with v8 of the operating system and version 6 of the ASDM. Delegates will configure the ASA using the console port, TFTP server, telnet and SSH using local and RADIUS authentication. The device will be configured to utilise Syslog and SNMP. ASA Firewalls will also be configured to use Access-Lists, Network Address Translation and VPN's utilising IPSec protocols. The course will cover the theory of Public/Private Keys, shared secret keys and their use in forming Site to site VPN's between ASA Firewalls using IKE and IPSec. Students will configure the units to create site to site VPN's, remote access VPN's using the Cisco Secure VPN Client and Web VPN's. The course will cover the theory of failover and delegates will configure Active/Standby failover on the ASA. Privileged commands and protocol analyser traces will be used, where necessary, to debug protocols and ensure proper operation of the ASA Firewall. Students will also perform password recovery operations. This course will involve interfacing the ASA with other network equipment, such as routers and switches, as would be expected in a network environment. Audience: Course is suitable for anyone involved in ASA firewall configuration and network security Course is approximately 50% practical Objectives: At the end of this course the student will be able to configure ASA Firewalls to: Allow configuration via console port, telnet and SSH Copy configurations and upgrade OS image. Authenticate users using RADIUS and local authentication. Act as a DHCP Server, Client and Relay. Operate as a Routed or Transparent Firewall. Operate in Failover mode. Support VLANs. Run routing protocols (OSPF and RIP) and exchange routing information with Cisco routers. Support Access Control Lists and content filtering. Support Object Grouping. Establish Internet connections using NAT and PAT. Setup site to site VPN's using IKE and IPSec. Setup Remote Access VPN's using Cisco secure VPN client. Setup Web VPN's Log access-list activity using a syslog server. Send traps to an SNMP Server. Password recovery Practical Exercises Lab Exercise 1: Basic Configuration of Cisco ASA. Lab Exercise 2: Configure support for VLANs on ASA. Lab Exercise 3: Connectivity via Telnet and Local/RADIUS authentication. Lab Exercise 4: Configure Static and Dynamic routing on ASA. Lab Exercise 5: Filter traffic using Access Control Lists. Lab Exercise 6: Configure NAT on ASA. Lab Exercise 7: Configure VPN's on ASA. Lab Exercise 8: Configure Active/Standby Failover on ASA/Pix. Lab Exercise 9: Password Recovery on Cisco ASA. Equipment Used in Practical Exercises: 4 Cisco ASA 5505 Firewalls running v8 of the CLI and capable of Active/Standby Failover. Pix 515E firewalls running v8 of the CLI, Cisco routers, switches and hubs as required.
waaacdwtacacs One Day Workshop for AAA of Cisco Devices using a Windows-based TACACS+ Server 7小时 Suitable for network planners, engineers or anyone interested in TACACS+ operation with Cisco IOS devices. Course is almost entirely practical if one day. If extended to 2 days due to lack of pre-reqs it will be around 50% practical. Objectives Review the operation of TACACS+ AAA process. Configure Cisco IOS devices to use TACACS+ for access to the management software. Configure Windows users/groups to authorise the TACACS+ requests. Configure TACACS+ server files for proper operation. Test successful operation of TACACS+. Equipment used in Practical Sessions: Cisco routers and/or switches running v12 of IOS. Windows 2008 R2 server running TACACS.net software.
waaacdwnpsr One Day Workshop for AAA of Cisco Devices using Windows 2008 NPS RADIUS 7小时 This one day workshop covers the configuration and operation of the RADIUS protocol in the authentication, authorisation and accounting of accessing the management software of Cisco IOS devices. The RADIUS server is Network Policy Server (NPS) in Windows 2008 R2. Audience: Suitable for network planners, engineers or anyone interested in RADIUS operation with Cisco IOS Devices and NPS. Workshop is almost all practical. If extended to 2 days it will be approximately 50% practical. Objectives: Review the operation of RADIUS AAA process. Configure Cisco IOS devices to use RADIUS for access to the management software. Configure connection request and network policies on NPS. Configure Windows users/groups to authorise the RADIUS requests. Test successful operation of RADIUS using NPS. Equipment used in Practical Sessions: Cisco routers and/or switches running v12 of IOS. Windows 2008 R2 server running Network Policy Server (NPS).
wciosd Workshop for Cisco IOS Devices Implementing IPSec using Certificate Authentication via a Windows 2008 R2 CA 7小时 This one day workshop covers the configuration and operation of negotiating IKE/IPSec Security Association (SA) between Cisco IOS devices. The devices will authenticate using certificates provided through enrollment with a Windows 2008 R2 Certification Authority. The Windows 2008 R2 server will run the Simple Certificate Enrollment Process (SCEP) using the Network Device Enrollment Service (NDES). Audience: Suitable for network planners, engineers or anyone interested in operation of Cisco IOS devices running IPSec using certificate authentication. Objectives: Review the operation of IPSec SA negotiation. Configure Cisco Router/ASA to authenticate and enroll with a Windows 2008 R2 CA. Configure Windows 2008 R2 Server to perform network device enrollment using NDES. Test successful operation of IPSec with certificate authentication. Equipment used in Practical Sessions: Cisco IOS devices running v12 of IOS and Windows 2008 R2 server acting as an enterprise CA and running NDES and certificate enrollment.

近期课程

课程日期价格【远程 / 传统课堂】
Practical RADIUS and TACACS+ - 香港 - 中環中心星期一, 2017-09-04 09:30¥20530 / ¥30530
Practical TCP/IP - 钰海环球金融中心星期一, 2017-09-04 09:30¥35330 / ¥38130
Understanding IPSec VPNs - 上海 - 上海中区广场星期二, 2017-09-05 09:30¥18180 / ¥23360

其它地区

TCP / IP网络,培训,课程,培训课程, 学习TCP / IP网络 ,TCP / IP网络课程,TCP / IP网络培训师,企业TCP / IP网络培训,TCP / IP网络辅导班,TCP / IP网络讲师,TCP / IP网络晚上培训,TCP / IP网络远程教育,TCP / IP网络私教,TCP / IP网络周末培训,一对一TCP / IP网络课程,短期TCP / IP网络培训,TCP / IP网络训练,TCP / IP网络老师,小组TCP / IP网络课程,TCP / IP网络教程,学TCP / IP网络班

促销课程

订阅促销课程

为尊重您的隐私,我公司不会把您的邮箱地址提供给任何人。您可以享有优先权和随时取消订阅的权利。

我们的客户